|
| |
|
|
| |
|
|
| Model No. |
ET-2030A |
ET-3000A |
| Detector Material |
Silicon |
InGaAs |
| Risetime |
<500ps |
<400ps |
| Falltime |
<500ps |
<400ps |
| Responsivity |
450V/W @830nm |
900V/W @1300nm |
| Power Supply |
24V |
24V |
| Frequency Response |
30kHz-1.2GHz |
30kHz-1.5GHz |
| Active Area (dia.) |
400µm |
100µm |
| Acceptance Angle (1/2 Angle) |
10° |
20° |
| Noise Equivalent Power (pW/√Hz) |
<60 |
<30 |
| Max linear pulse density |
<10mW/mm2 |
<40mA/mm2 |
| Maximum Undistorted Output Voltage |
500mVp-p |
400mVp-p |
| Connector |
BNC |
BNC |
| Mounting (tapped hole) |
8-32 and M4 |
8-32 and M4 |
| Price (North America Only) |
$370.00
|
$390.00
|
| Qty. |
|
|
| Notes:
Not Suitable for unmodulated cw applications.
- The ET-2030A and ET-3000A utilize wall plug in power supplies.
- Amplified photodetectors do not have an internal termination. Optimal termination is 50Ω.
- Note on Spectral Response Curve: The responsivity figures shown on the curves below do not include the amplifier gain.
- The ET-2030A and ET-3000A can be ordered with a FC fiber optic receptacle. See Price List for cost.
- For more information on our amplified photodetectors, please view the Photodetector Application Notes page in the Publications & Technical Support section of this website.
- For information of the use of our amplified photodetectors, please view the Photodetector Users Guide page in the Publications & Technical Support section of this website.
- To convert frequency response to time domain response or vice versa, please view our Frequency Response to Time Domain Response Conversion calculator page in the Publications & Technical Support section of this website.
Warranty/Terms and Conditions: Please visit the Photodetector Warranty/Terms and Conditions pages in the Publications & Technical Support section of this website.
|
|
 |
|
|
|
|
|
| |
|
|
| |
|
|
 |
