|
| |
|
|
| |
|
|
|
EOT offers >9GHz amplified photodetectors for time domain and frequency response measurement for sub 1mw input powers. Applications for the photodetectors include monitoring the output of externally modulated cw sources and mode-locked lasers for telecom, analog microwave and general R&D markets. These photodetectors are available with either GaAs or InGaAs PIN photodiodes, their own built in transimpedance amplifier and power supply. Running a coaxial cable from the SMA output connector on the photodetector to an oscilloscope or spectrum analyzer and terminating into 50Î is all that is required for operation. These photodetectors are available with either a free space input or FC coupled fiber input. Amplifier gain is 26dB for both the GaAs and InGaAs photodetectors.
| Description |
ET-3500A |
ET-3500AF |
ET-4000A |
ET-4000AF |
| Spectral Range |
1000-1650nm |
1000 – 1650nm |
400-900nm |
400-900nm |
| Detector Material |
InGaAs |
InGaAs |
GaAs |
GaAs |
| Risetime |
<40ps |
<40ps |
<40ps |
<40ps |
| Falltime |
<40ps |
<40ps |
<40ps |
<40ps |
| Bandwidth |
20kHz – 9GHz |
20kHz – 9GHz |
20kHz – 9GHz |
20kHz – 9GHz |
| Conversion Gain |
900V/W@1550nm |
900V/W@1550nm |
450V/W@850nm |
450V/W@850nm |
| Current Monitor Output |
1mV/µA |
1mV/µA |
1mV/µA |
1mV/µA |
| Max. Nondistorted Output V |
450mV p-p |
450mV p-p |
450mV p-p |
450mV p-p |
| Noise Equivalent Power b |
<25pW/√Hz |
<25pW/√Hz |
<25pW/√Hz |
<25pW/√Hz |
| Max input cw power |
10mW |
10mW |
10mW |
10mW |
| Photodiode Active Area Dia. |
32µm |
32µm |
40µm |
40µm |
| Input Conncector |
Free Space |
FC/PC |
Free Space |
FC/PC |
| Fiber Optic Connection |
N/A |
9/125µm SMF b |
N/A |
9/125µm SMF b |
| Output Connector |
SMA |
SMA |
SMA |
SMA |
| Power Supply |
5 VDC |
5 VDC |
5 VDC |
5 VDC |
| Mounting (Tapped Hole) |
8-32 or M-4 |
8-32 or M-4 |
8-32 or M-4 |
8-32 or M-4&l |
| Price (North America Only) |
$2450.00
|
$2875.00
|
$2325.00
|
$2750.00
|
| Qty. |
|
|
|
|
Notes:
Not Suitable for unmodulated cw applications.
a. All specifications apply for a 50Ω termination unless otherwise noted.
b. Multi-mode fiber available. May limit bandwidth to <9GHz.
1. For more information on our Amplified 10GHz photodetectors, please view the Photodetector Application Notes page in the Photodetector Application Notes page in the Tech Support section of the website.
2. For information on the use of our Amplified 10GHz photodetectors, please view the Photodetector Users Guide page in the Tech Support section of this website.
3. To convert frequency response to time domain response or vice versa, please view our Frequency Response to Time Domain Response Conversion calculator in the Tech Support section of this website.
4. To convert between watts and dBm, please view our Power Conversion calculator in the Tech Support section of this website.
5. Warranty terms and conditions: Please visit the Photodetector Warranty/Terms and Conditions pages in the Tech Support of this website.
|
 |
|
|
|
|
|
| |
|
|
| |
|
|
 |
