ET-2030A - 2 GHz Silicon Amplified Photodetector
| Part No. (Model) |
(ET-2030A)a |
| Detector Material |
|
| Rise Time/Fall Time |
|
| Conversion Gain |
|
| Power Supply |
|
| Bandwidth |
|
| Active Area Diameter |
|
| Acceptance Angle (1/2 angle) |
|
| Noise Equivalent Powerb |
|
| Maximum Linear Rating |
|
| Mounting (Tapped Holes) |
|
| Output Connector |
|
Product specifications are subject to change. All products are RoHS compliant.
a Low frequency cut-off is 30 kHz and not suitable for measuring lasers with a lower rep rate
b Noise Equivalent Power (NEP) is determined via short circuit output.
NOTE: All specifications apply for a 50 Ω termination unless otherwise noted.
Amplified Photodetectors Data Sheet