Sign In to Your Account


Don't have an account yet? Click here to signup.

Forgot Password? Click here to retrieve it.

Sales & Tech Support: 231-935-4044     

$ 3,300.00

Pavos Series 1045 nm - 1080 nm High Power Optical Isolators - Large Aperture (>5 mm)

EOT’s Pavos Series Faraday Rotators rotate the plane of polarized light 45° in the forward direction and an additional 45° of non-reciprocal rotation in the reverse direction while maintaining the light’s linear polarization. When placed between crossed polarizers, a Faraday Rotator becomes an optical isolator. An optical isolator shields lasers from destabilizing and potentially destructive back-reflected light from interfaces on downstream optics or back-scattered ASE from optical amplifiers. Based on high Verdet constant, low absorption coefficient Terbium-based rotating material, and developed to work with up to 50W of average input power in the 1µm wavelength range, Pavos Series isolators provide the ultimate protection for polarized output from Nd- or Yb-doped crystal, glass, and fiber lasers.

**Please note that a waveplate is needed if you are wishing to achieve more than 45º rotation through the device.**

*If in Japan, please contact EOT directly for pricing and availability.

1045-1080nm Isolatora
Transmission at 22°C
Isolation at 22°C 
Rotation at Specified Wavelength
45° ± 2°
Damage Thresholda 
10J/cm2 at 10ns
1J/cm2 at 8ps
cm2 CW

Escape ports should be used if rejected light is >1W or 0.15J/cm2 at 10ns or forward light is >25W. All stray beams should be properly terminated.


  • All products are RoHS compliant.
  • Product specifications and pricing subject to change without notice.
  • Operating Temperature: Performance of EOT’s Optical Isolators is related to operating temperature. For more information, please contact EOT.
  • Escape Ports: All EOT High Power 1045-1080nm Optical Isolators come standard with double escape ports on both the input and output polarizer assemblies. These escape ports can be adjusted by the customer to be either open or closed. Escape ports should be used if rejected light is >1W or 0.15J/cmat 10ns or forward light is >25W. All stray beams should be properly terminated. Failure to use the escape ports under these conditions could result in optical damage or degrade the performance of your isolator. Please consult EOT's User Guide on how to use the escape ports.
  • For incident powers ≥50W, you may contact EOT’s sales department at sales@eotech.com or view our Custom Products page on this website.
  • For mounting options, please reference the 1045-1080nm Optical Isolators User Guide.

Pavos Series 1045-1080nm Optical Isolators - Large Aperture (>5mm) Data Sheet

Pavos Series 1045-1080nm Optical Isolators - Large Aperture (>5mm) User Guide

Faraday Rotators & Optical Isolators Technical Notes



My Shopping Cart

Your cart is empty.

Continue Shopping