• 

EOT 100 W Fiber Laser Isolator

Specificationsa
Part Number	110-10453-0001
Fiber Typesb	Contact EOT
Maximum Incident Average Power	100 W
Center Wavelength	1065 nm ± 15 nm
M2 Degradation	<10%
Standard Output Beam Diameter (1/e2)c	3 mm, 5 mm, 7.5 mm, 10 mm
Insertion Loss of light through fiber cored	<0.5 dB
Isolation at 10 °C - 50 °C	>20 dB
Isolation at 30 °C	>27 dB
Return Loss	<-50 dB
Reverse Power Handlinge	77 W for 90 sec. max.
Maximum Pulse Energy	1.1 mJ
Peak Power	20 kW
Operating Temperature	10 °C - 50 °C
Storage Temperature	-10 °C - 70 °C
Storage Humidity, non-condensing	10% - 90%

^a Product specifications are subject to change. 
^b Standard fiber length is 3 m, protective Teflon tubing length is 2.15 m in a 2 m armor cable jacket. Customers should contact EOT regarding other fiber requirements.
^c Unless otherwise specified by customer Insertion loss of light through fiber cladding is not included in the insertion loss specification.
^d Insertion loss of light through fiber cladding is not included in the insertion loss specification.
^e Case temperature ≤50 ºC

Note: It is recommended that the isolator be attached to the laser enclosure using a compression fitting that secures only the outer, metal reinforced jacket. The inner PTFE tube is meant as an abrasion barrier for the optical fiber and should be allowed to move freely with the fiber. 

EOT 100 W Fiber Laser Isolator Data Sheet

Contact Information
First Name:*
Last Name:*
Phone:*
Email:*
Company:*
Address:*
City:*
State/Province:
Zip:*
Country:*

Custom Specifications
Product Interest:*	Broadband Rotators Faraday Rotators Broadband Isolators Free Space Isolators PI Isolators for Fiber Lasers Fiber Collimators Photodetectors Other
What is your Application?:
Is Light Polarized:
If Polarized, Define Input/Output:
What is the 1/e2 Beam Diameter?:*
Intensity Profile:*	--None-- Gaussian Flat Top
Center wavelength/range:*
Fiber: Core,cladding,mfr,mod#...:
CW or Pulsed?:*	--None-- CW Pulsed
If CW, what is the power (W)?:
P-peak value:
P-avg value:
J/pulse value:
Pulse width (sec):
Rep. rate (Hz):
Power/Energy density?:
Operating Temperature (or range):
Is the application commercial or defense:*	--None-- Commercial Defense
Who is the end user?:*
What country will this device be used in?:*
Special tests, Build requirements, etc:
Security Code:	17928
Verify Code: